Click to return

 

TRACTOR PULLERS OF EAST CENTRAL MINNESOTA RULES

MILLE LACS COUNTY FAIR CLASSES

 

Antique
               Weight Classes:
4500, 6500.   
Stock RPMs Speed limit:  4 mph
For 6500 class tractors: must be 1950 or older, all others must be 1942 or older and have factory stock
m
otor, carburetor or injector pump and drive train for that make and model.
No block spacers. Governors required. RPM’s checked at random.
 

Farm Stock
           
Weight Classes: Non Turbo 3750, 5000, 7000, 9000, 12000, 15000, 18000, Turbo 10000*.
Factory appearing or stock replacement block, carburetor, injection pump, front end, and drive train for that make and model. Allis WC & WD can run D17 block.
All tractors above 9000 lbs must have fenders and floor plate.
*10000 factory turbo, TO 4, 
or factory add on Turbos (such as 4020 or 966 with turbo).
                       Tractor must have a factory wide front.

12000 and up factory replacement turbo, exhaust and intake must hookup with no modification.
No block spacers. Governors required. Factory RPM set at pump for that make and model.
Speed limit for 3750 & 5500-5 mph;  7000, 9000-6 mph; 10000-7 mph; 12000 and up 8 mph.
3750 & 5000 max tire size: 16.9-38, for 7000-10000 turbo max tire size: 18.4-38, 12000 and up no size limit.

  11,000 Hobby Rules
Roll over protection and dead man throttle required. Wide front min. of 60”.3x4 turbo allowed.
Scatter Blankets and wheelie bars required.
Cut tires, power blocks allowed. JD 2 cylinder must have cross belt on flywheel.
One fuel only (gas, propane, diesel fuel-no nitrous or oxidizers).
Quick releasing side panels removable for inspection required. Fuel shutoff between pump and fuel filters.

Open/Modified
          
Weight Classes: 7500, 9000
Must have safety blanket on clutch and flywheel, Wheelie bars required.
Must have breakaway switch and second emergency shutoff within reach of driver.
Factory appearing block.  Exhaust pipe must be cross bolted.  Front dampener covered. 
Helmet and firesuit are MANDATORY.  Sturdy roll over protection required.
Wide front must track within rear wheels.
9000 one turbo (any size) only.

Super Trophy
**Super Trophy offered in  3750, 5000, 7000, 9000, 10000 Turbo,12000, 15000 1/2 pts given, 18000 1/2 pts given Farm Stock Classes**
Entry fee of $10.00 will be collected at the first two pulls. 
Points will be tallied for participation in the Chisago, Kanabec, Isanti, Pine, & Mille Lacs pulls and a trophy awarded to the highest point total in each class (prizes will be awarded only if there are at least 4 participants in the class).
Participant must have submitted a paid registration to a minimum 4 of 5 counties.

MILLE LACS COUNTY TRACTOR PULLING RULES


1.Sportsmanship Rule: Un-sportsman like conduct will not be tolerated. It will result in
  
a suspension of a year and on day.
2.Contest is governed by the judges, with all the judge’s decisions final. Judges have
  
the right to stop and disqualify participants at any time. If disqualified your entry fee
  
will not be refunded.
3.Entry fee includes driver and one pit person unless otherwise stated by the officials at   
  
the pull.
4.The use of alcoholic beverages or drugs is not permitted in the pit area at any time.
5.No one under the age of 14 allowed n pit area. Ages 14-17 must have both parents sign waiver. (for details see waiver)

6One Pull per tractor, unless otherwise stated by the officials at the pull. Hobby stock and
  
open must pull next weight class in same division.
7.All weight classes are with the driver and allow no extra weight.
8.Only one type of fuel per tractor.
9.Operator must remain seated during entire pull and have full control of the tractor at all
   
times.
10You can only protest another tractor and driver if they are in the class you pull in.
11.All tractor engines must have kill switch within reach of driver.
12.If any parts or equipment fall off the tractor during the pull it will be disqualified.
13.No first puller re-pull option.
14.All tractors must have working rear brakes.
15.Tractor must remain within the boundaries of the track for the length of the pull.
16.All engine fans must be factory or shrouded steel 1/16” or thicker. All transmissions
    
and clutch housings covered. All turbo not under a hood must be completely shrouded
    
except for an inlet and exhaust pipe 1/16” or thicker.
17.No part of the tractor may interfere with the sled during the pull. Front weights and
    
support frame must be a maximum 11’ from center of rear axle. Weights must be
    
safely secured and must not be on the three-point arms.
18.All exhausts must be factory or discharged vertically above highest point of tractor,
    
no rain caps or curved exhaust pipes on hobby or open.
19.All classes will use standard drawbar rules. Minimum drawbar length of 18” from the
    
center of the rear wheel to the point of hook measured horizontally. Drawbar must be
    
stationary in all directions. There is a maximum height of 20” from the hitching points
    
parallel to the ground. Pull point may not be more than 11/2” from the back edge of
    
hitching device. No bracing drawbar to three-point or top link.
20.Dual tires are allowed in farm stock only and must meet proper size requirements.
    
They must be securely fastened with a minimum of 6 bolts.
21.Tractor may downshift during the pull provided the forward motion of the sled is
    
continued. The use of torque’s, amplifiers, and power shifts is permitted.
22.In antique and Farm Stock the top three pullers will have their RPM’s checked at the
    
end of the track (if they are protested). Driver must remain with the tractor.
23.Antique and farm stock classes must have working PTO unless factory equipped
    
without. Tractors must have factory stock top cover, seat assembly, fuel tank, and hood
    
and nose.
24. Antique
and farm stock throttles must be against throttle stop at max RPMs.

 


Click to return to forms Page